LPLC-18 Series
18W Single Output Switching Power Supply
Application:
Features
Constant voltage design
90-132VAC input only
Fully encapsulated with IP67 level
Class power unit, no FG
Fully isolated plastic case
Fanless design, cooling by free air convection
100% full load burn-in test
Low cost, high reliability
2 years warranty
LPLC-18 series
| MODEL | LPLC-18-350 | LPLC-18-700 | |
|---|---|---|---|
| OUTPUT | RATED CURRENT | 350mA | 700mA |
| DC VOLTAGE | 6~48V | 6~25V | |
| RATED POWER | 16.8W | 17.5W | |
| RIPPLE & NOISE (max.) | 300mVp-p | 250mVp-p | |
| VOLTAGE TOLERANCE | ±5.0% | ±5.0% | |
| CURRENT ACCURACY | ±8.0% | ±8.0% | |
| LINE REGULATION | ±1.0% | ±1.0% | |
| LOAD REGULATION | ±3.0% | ±3.0% | |
| SETUP, RISE TIME | 3600ms, 150ms / 115VAC | 3600ms, 150ms / 115VAC | |
| HOLD UP TIME (Typ.) | 20ms/115VAC at full load | 20ms/115VAC at full load | |
| INPUT | VOLTAGE RANGE | 90 ~ 132VAC 127 ~ 186VDC | 90 ~ 132VAC 127 ~ 186VDC |
| FREQUENCY RANGE | 47 ~ 63Hz | 47 ~ 63Hz | |
| EFFICIENCY (Typ.) | 82% | 80% | |
| AC CURRENT | 0.5A/115VAC | 0.5A/115VAC | |
| INRUSH CURRENT(Typ.) | COLD START 40A(twidth=280 s measured at 50% Ipeak) at 115VAC | COLD START 40A(twidth=280 s measured at 50% Ipeak) at 115VAC | |
| MAX. No. of PSUs on 16A CIRCUIT BREAKER | 12 units (circuit breaker of type B) / 20 units (circuit breaker of type C) at 115VAC | 12 units (circuit breaker of type B) / 20 units (circuit breaker of type C) at 115VAC | |
| LEAKAGE CURRENT | 0.25mA/ 120VAC | 0.25mA/ 120VAC | |
| Specs Sheet |  Download PDF | Download PDF |